ZSUN CHIPS CO., LTD
One-stop Electronic Components Supply Platform.
Add to Cart
Conductive Fabric Tapes Reel Single Side Type Customize Size Shielding Copper Nickel Plated Laird Series
Single Side Conductive Fabric Tapes
Laird Conductive Fabric Tapes are constructed of a copper nickel plated fabric with pressure sensitive adhesive.They offer high electrical
conductivity in both XY and Z directions and provide good adhesion andEMI shielding performance.
Laird Conductive Fabric Tapes are available in natural color and black color.Besides,tapes with UL510FR rating(halogen free)are available as well.
Application Techniques
1. Adhesion is dependent upon the amount of adhesive-to-surface contact developed.Apply pressureto the bonding surface will develop better adhesive contact,and thus improve adhesion.
· To a 25mm(1in.)width tape,recommend a 2Kgf rubber roller to press back and forth twiceunder the speed of 5mm/sec.Users may adjust the speed (recommended within 3-10mm/sec.)or roller loading (recommended 1-3Kgf)according to different application.Ifavailable,apply heat up to 120℃ for several seconds would be help to adhesion.
◆Users may also apply 10-30psi for 5-15sec to the surface.The loading and residual time canbe adjusted as well according to the application,area(dimension),and surface.In general,higher loading and longer residual time will make the contact between adhesive and thesurface more stable and enhance the conductivity and adhesion.
2. After applying the tape onto a surface,the adhesion will build up gradually.Keep the PSAassembly under recommended compression or loading for 24 to 72 hours would be help to reachhigh adhesion.3To obtain optimum adhesion,the bonding surfaces must be clean,dry and well unified.A typicalsurface cleaning solvent is isopropyl alcohol.Use proper safety precautions for handling solvents.
4. 1Ideal tape application temperature range is 21°C to 38°C.Initial tape application to surfaces attemperatures below 10°C is not recommended because the adhesive becomes too firm to adherereadily.However,once properly applied,low temperature holding is generally satisfactory.
Operation Temperature
Most of Laird Single Side and Double Sides Conductive Fabric Tapes will keep in well adhesion and verylittle resistance changed for several years under-40°C to 80°C after application.Even under hightemperature environment such as 105°℃ or even 125°℃,the performance of some tapes will be good aswell after weeks to months.
Shelf Life and Storage Condition
1 year from date of shipment in sealed bag under 0-40°℃.No humidity control is required.
Manufacturing Sites
LT-Shenzhen and LT-Kunshan are the key manufacturing sites of EMI Tapes.
About Us: ZSUN TECH
Brand Advantage:
ZSUN consists of a professional team with an average of over 10 year of expertise in the field of electronic components.
An advanced enterprise specializing in the research, development, production, and sales of EMC components, connectors, cables, and integrated circuits (ICs).
Professional EMC products and services, including EMC component selection, EMC simulation, EMC training, and EMC corrective testing services.
ZSUN is a senior enterprise specializing in the research and development, production and sales of EMC components, connectors, cables and Integrated Circuits (ICs). Its headquarter is located in Shenzhen. It consists of a professional team with an average of over 10 year of expertise in the field of electronic components.
The main products include: high current power inductors, Moding power choke, NR inductors, SMD power inductors, DIP inductors, Rod inductors, DC& signal common mode choke, AC common mode choke, transformers , Board-to-board connectors, wire-to-board connectors, communication interfaces, terminals, European connectors, crimp terminals and high-speed connectors, etc., are widely used in industrial control, automotive electronics, medical electronics, new energy motors, communication equipment , digital power amplifier, financial electronics, power system, cables, Integrated Circuits (ICs) and other fields.
ZSUN is committed to build a one-stop electronic components supply platform, allowing customers to enjoy the most professional EMC products and services, namely EMC components selection, EMC simulation, EMC training and EMC rectification &testing services. With advanced management system, strong development capabilities and excellent products Quality and perfect service, ZSUN has become a supplier of electronic components for many well-known enterprises at home and abroad.
Contact Us:
Sales Manager: Rose
Email: Rose@zsun-chips.com